致诚科技,专业从事研发镀膜工艺综合解决方案的技术型企业!
  • 致诚镀膜优势特点所在:专业、诚信、极致可靠。

东莞市致诚科技有限公司(纳米喷镀)

十年专注纳米镜面涂装技术,为您量身定制镜面涂装设备及材料

全国服务热线

400-0808-236
纳米喷镀材料纳米喷镀设备油漆光油涂料

pu光油-PU哑油-PU清漆

致诚科技纳米喷镀的优点:

1. 耗能少,投资小  (纳米喷镀投资3~5万即可生产)

2. 颜色效果多样化  (镜面颜色多样化,颜色无限制)

3. 不限材质,百镀  (匹配使用各种材质镜面涂装需求)

4. 结构尺寸无限制;  (产品尺寸无限制,越大越显优势)

5. 环保 无八大重金属 ;(相比水电镀及氧化,无重金属排放)

6. 工艺简单,生手简单培训即可。(会喷漆即可三天内掌握工艺技术)

7. 高品质的银镜喷镀配套,购买致诚的设备材料,免费教学,学会为止。

8. 致诚科技提供镀膜系统服务:设备、材料、加工、工艺技术、项目配套。

pu光油-PU哑油-PU清漆

PU varnish - Pu dull oil - PU varnish


【理化参数】

[physical and chemical parameters]


【包装规格】
1套包含油漆3.5KG,稀释剂3KG,固化剂1KG
开油比例:(光油:固化剂:稀释剂)3:1:3;烤65-70度,30分钟
【主要组成】
由特殊羟基丙烯酸树脂、助剂、溶剂精制而成。以A、B两组分装。
【产品说明】
本品具有流平性好的施工性特点,制品表面,光泽高,丰满度好,硬度高,优异的附着力,抗污染和耐化学性。耐黄变性好,固含高,薄涂就可以得到很好的光泽。
【使用范围】
用于各种电动工具外壳、电脑外壳、电脑鼠标壳、手提式影音器材、CD机、照相机、电吹风外壳、运动器材、麦克风、剃须刀、手电筒外壳、电话、望远镜等塑料或金属制品、陶瓷、PLOY等工艺产品的底漆上的罩光。

[package specification]

One set contains 3.5kg paint, 3kg diluent and 1kg curing agent

Oil ratio: (varnish: curing agent: diluent) 3:1:3; Bake at 65-70 degrees for 30 minutes

[main components]

It is refined by special hydroxyl acrylic resin, auxiliary agent and solvent. They are packed in two groups A and B.

[product description]

This product has the construction characteristics of good leveling, high gloss, good fullness, high hardness, excellent adhesion, anti pollution and chemical resistance. Good yellowing resistance, high solid content, thin coating can get good luster.

[application scope]

It is used for covering the primer of plastic or metal products such as electric tool shell, computer shell, computer mouse shell, portable audio-visual equipment, CD player, camera, hair dryer shell, sports equipment, microphone, razor, flashlight shell, telephone, telescope, ceramics, ploy and other process products.


【施工工艺】
1.在喷涂前充分清洗底材,以确保优异的附着力和表面效果。
2.本品作业条件,温度: 15-30℃;湿度:(RH)≤75%
3.配套固化剂:PU-002 配套开油水:PU-605
4.开油比例: A组:B组:C组(油:固化剂:开油水)=3:1:3-4
5.喷涂粘度(岩田2号,25℃) : 8-11s
6.干燥条件: 65-70℃×30min(可自干)
7.喷涂空气压力: 4.5-6.5kg/c㎡
8.喷涂距离:10-20cm
9.喷枪口径:1.1-1.5mm

[construction technology]

1. Fully clean the substrate before spraying to ensure excellent adhesion and surface effect.

2. Operating conditions: 15-30 ℃; Humidity: (RH) ≤ 75%

3. Supporting curing agent: pu-002, supporting oil and water: pu-605

4. Oil ratio: group A: group B: Group C (oil: curing agent: oil) = 3:1:3-4

5. Spray viscosity (Yantian 2, 25 ℃): 8-11s

6. Drying condition: 65-70 ℃ × 30min (self drying)

7. Spraying air pressure: 4.5-6.5kg/cm2

8. Spraying distance: 10-20cm

9. Diameter of spray gun: 1.1-1.5mm


【施工注意事项】
1:湿度大于85%,或阴雨天施工请少量添加防白水。
2:被涂物表面油脂、灰尘、清除干净,水分烘干。
3:避免与不同系列产品混用,以免影响附着力及其它物性
4:油漆开稀后放置5分钟再喷涂
5:喷好后不可马上干燥,烘烤温度不可过高,以免烧焦底材
6:油漆调稀时用专用稀释剂以免影响漆膜外观及性能
7:开盖使用后务必盖紧,以免吸湿或风干

[construction precautions]

1: If the humidity is higher than 85%, or in rainy days, please add a small amount of anti white water.

2: The grease and dust on the surface of the coating shall be removed, and the moisture shall be dried.

3: Avoid mixing with different series of products, so as not to affect the adhesion and other physical properties

4: Leave the paint for 5 minutes before spraying

5: Do not dry immediately after spraying, and the baking temperature should not be too high to avoid scorching the substrate

6: When thinning the paint, use special thinner to avoid affecting the appearance and performance of the paint film

7: Be sure to cover tightly after use to avoid moisture absorption or air drying


包装规格:
5KG胶桶,20KG铁桶,配套稀释剂20KG蓝胶桶

Package specification:

5kg rubber barrel, 20kg iron barrel, 20kg blue rubber barrel with diluent


致诚科技根据产品特性匹配最佳的镀膜工艺方案,
致诚镀膜优势特点所在:专业、诚信、极致可靠。


Zhicheng Technology matches the best coating process scheme according to the product characteristics,

Zhicheng coating advantages: professional, honest, extremely reliable.


纳米喷镀  纳米喷镀材料  纳米喷镀设备  纳米喷镀加工  纳米喷镀厂家  纳米喷镀原料  纳米喷镀加工厂家  纳米喷镀配方  纳米喷镀技术  纳米喷镀工艺  纳米喷镀培训  纳米喷镀药水
纳米喷涂  纳米喷涂材料  纳米喷涂设备  纳米喷涂加工  纳米喷涂厂家  纳米喷涂原料  纳米喷涂加工厂家  纳米喷涂配方  纳米喷涂技术  纳米喷涂工艺  纳米喷涂培训  纳米喷镀药剂
银镜喷镀  银镜喷镀材料  银镜喷镀设备  银镜喷镀加工  银镜喷镀厂家  银镜喷镀原料  银镜喷镀加工厂家  银镜喷镀配方  银镜喷镀技术  银镜喷镀工艺  银镜喷镀培训  纳米喷镀机
银镜喷涂  银镜喷涂材料  银镜喷涂设备  银镜喷涂加工  银镜喷涂厂家  银镜喷涂原料  银镜喷涂加工厂家  银镜喷涂配方  银镜喷涂技术  银镜喷涂工艺  银镜喷涂培训  纳米喷涂机
纳米电镀  纳米电镀材料  纳米电镀设备  纳米电镀加工  纳米电镀厂家  纳米电镀原料  纳米电镀加工厂家  纳米电镀配方  纳米电镀技术  纳米电镀工艺  纳米电镀培训  纳米喷镀机器
环保电镀  环保电镀材料  环保电镀设备  环保电镀加工  环保电镀厂家  环保电镀原料  环保电镀加工厂家  小型电镀设备  环保电镀技术  环保电镀工艺  环保电镀培训  纳米喷涂机器

上一篇:UV光油 - 蒸发电镀材料-塑胶UV清漆 下一篇:纳米喷镀底面漆-银镜喷镀水性漆-喷镀漆厂家


东莞市致诚科技有限公司

研发:广东省东莞市万江区大汾流涌尾工业区
加工:东莞市凤岗镇黄洞村东升工业区东升二路18号

热线:400-0808-236 / 13713375955(邓工)

邮箱:1296589278@qq.com   dgzhicheng@gmail.com

备案号:粤ICP备20043090号

关注公众号

关注公众号

邓工微信

邓工微信(扫一扫添加)